TORRANCE, CA — November 19, 2007 - LEDtronics® announces the release
of its new DC-to-DC Dimmer for LED Lighting Products, supporting 5VoltsDC to 40VoltsDC
applications—up to 2Amps or 24Watts—LEDtronics Part Number LED-DIMMER-001.
The LED Dimmer makes it possible to dim all 5VoltsDC to 40VoltsDC LED products
such as LED strip lights, LED bulbs and LED floodlights. Since LEDs draw much
less current than traditional incandescent bulbs one had to buy a special high-end
electronic dimmer to control the desired light levels for their LED lighting application.
The DC-to-DC LED Dimmer is ideal to use for all your 12VoltsDC LED products, mix-and-match
LED light strips and LED bulbs, maximum load per DC-to-DC Dimmer is 24Watts. The
LED Dimmer will enhance your architectural low power high-benefit lighting designs.
Here’s an extra advantage in using an LED dimmer: by lowering the current
to the LED, you extend the life of the LED.
LED dimming range is 0-100% of input. Input Voltage can be any DC Voltage between
5VoltsDC and 40VoltsDC. Dimmer output Voltage is continuously adjustable between
zero and full-on. LED Dimmers operate on minimal no-load current (10-15mA). Power
dissipation of the LED dimmer’s drive circuitry is less than 0.7Watts. No
extra load is added to the lighting circuit, current draw is only 10-15mA. Not
for use with inductive devices such as motors, etc.
No special configuration is needed. LED Dimmer can drive up to 2000 Standard
White discrete LEDs or 50 High-Flux LEDs. One unit can dim the supplied power
for an entire lighting channel or up to 2Amps, 24Watts maximum of LED bulbs,
floodlights, tube lights and light strips. The LED Dimmer can be used with 12VoltsDC
solar power systems or connect directly to 120VoltsAC-to-12VoltsDC transformers.
The size is 2.3inches (58mm) long by 1.9inches (48mm) wide by 1.1inches (28mm)
high (excluding knob). Comes in an industry-standard hockey puck package design.
Designed for panel installation, rack installation, or stand-alone use.
Founded in 1983, LEDtronics® leads where others only follow when it comes
to designing, manufacturing and packaging state-of-the-art LEDs to meet the
world’s constantly changing lighting needs. Our inventive product line
encompasses an array of direct incandescent lamp replacement Based LED bulbs,
low-cost snap-in and relampable Panel Mount LEDs, high intensity sunlight-visible
Discrete LEDs, PCB LED circuit board status indicators, surface mount diodes
SMT LEDs, full-spectrum rainbow RGB LEDs and infrared (IR) LEDs.
The price of one DC-to-DC LED Dimmer is $59.95. OEM and MRO large quantity
discounts are available. Availability is stock to 4 - 6 weeks. LEDtronics LED
Dimmer carries a two-year limited warranty. For additional information on how to incorporate our LED Dimmer into your architectural lighting designs,contact LEDtronics toll free at 1-800-579-4875,
telephone 310-534-1505, fax at 310-534-1424, click here to email us
or mail at LEDtronics Inc., 23105 Kashiwa Court, Torrance, CA 90505. Visit our website at www.LEDtronics.com.
Read the product datasheet online at: DIMMER