| |
Home > LED Tube Lights > LED Tube Light Fixtures for T8 LED Tubes > LED Tube Light Fixture, Open Commercial, T8 4FT
| LED Tube Light Fixture, Open Commercial,T8 4FT |
| 48" Open Lamp — One Light Strip Channel |
| Premium-Grade for LED T8 Light Tube(s) — ETL Listed |
| Green Lighting — Reduced Energy and A/C Bills Over Fluorescent Lighting | | 22ga Cold-Rolled Steel Housing — Baked White Polyester Finish |
|
|
|
ONLY FIXTURE IS SOLD. 4-ft. LED T8 LAMPS SOLD SEPARATELY. Never Install Fluorescent Tubes in This Fixture.
With Heavy Duty On / Off Safety Switch
• Easily accessible on exterior of wire way.
• Allows individual fixture to be switched ON/OFF
during re-lamping or maintenance.
• Prevents damage to lamp and electrical shock
during lamping and re-lamping.
• Allows safe entry to wire way channel where
power connector can be disconnected for
maintenance to fixture.
|
|
- Part Number: LEDSTR100-1-4LR
- Type: Open Lamp One-Light Channel for LED T8 Light Tube(s)
- Door Frame: 22-gauge cold-rolled steel; T-hinge, positive-spring-loaded latch
- Construction:22-gauge cold-rolled steel housing
- Lamp Type: LED T8 light tube, self-driven. Both black and white leads connected to the same end

|
- Construction: 22-gauge cold-rolled steel housing
- Finish: Baked white polyester finish / Minimum Reflectance: 86%
- Wiring: Operates T8 LED light tube(s) only
- Labels: ETL-Listed / Conforms to UL Standard 1598-SUB8750
- Lamp Type Used: LED T8 light tube, self-driven. Do not use fluorescent.
|
All Series under this Category:
LEDSTR100 Open Tube Fixture, 2.5"×4', Single T8 LED lamp
LEDSTR100-1-4 Series
2.5" × 48" Single Lamp Open Fixture for Single T8 LED Tube Light
 (not to scale)
|
|
One LED 4ft T8 Open Tube Fixture
All specifications and pricing subject to change without notice.
| Features: |
- Two Year Fixture Warranty
- 1-Lamp Strip for LED T8 Light Tube
- Heavy Duty Safety Switch
- 22-Gauge, Cold-Rolled Steel Housing (20ga available as specified)
- End Plates are Fastened to Housing by Sheet Metal Screws to Assure Rigidity
- End Plates may be used as Channel Couplings
- Door Frame Painted after Fabrication
- Screw-On End Caps
- ETL Listed / Conforms to UL Standard1598 - SUB 8750
|
|
|