| |
Dimming
Range: 0-100% of Input |
| |
Input
Voltage: Any DC Voltage between 5VDC and 40VDC |
| |
Output
Voltage: Continuously adjustable between zero and full-on |
| |
Minimal
no-load current (10-15mA) |
| |
Can
drive up to 2000 Standard White LEDs or 50 High-Flux LEDS |
| |
Industry-standard
hockey puck package |
| |
PWM
design generates very minimal heat
|
|
|
|
|
| |
Encapsulated
design resists vibration. |
| |
Setting
is retained during power failure. |
| |
Easy
to wire: Simple screw terminals |
| |
Efficiency
is approx. 95% at most settings, to minimize waste
heat and save battery power. |
| |
Control
up to 2A maximum. |
| |
No
configuration needed when used with any Voltage between
5V,and 40V (batteries or DC power supplies). Just plug in
and go.
|
|
|
| |
DC
Dimming of LEDs: Lamps, Bulbs, RopeLEDs Clusters,
Panels. Any DC LED product from 5VDC-40VDC up to 2
Amps. |
| |
Adjustable
mobile lighting: Unit can run on batteries, no AC needed and
light can be adjusted (dimmed) to maximize battery life. |
| |
Use
instead of power dropping resistors to minimize heat
generation and allow fine adjustment of light output. |
| |
For
Panel or Rack installation or Stand-alone use. |
| |
One
unit can dim the supply power for an entire lighting channel. |
| |
Use
to adjust RGB LED lamps to adjust the ratios of Red Green
and Blue for truest white color. Also for White LEDs since
PWM dimming does not shift the color temperature.
|
|
