 |
|
| |
Features |
Applications |
| |
| • |
Very
low
heat generation |
| • |
No
ballast required |
| • |
No
reflectors |
| • |
Targeted
light output |
| • |
High
shock/vibration resistance |
| • |
One
year warranty |
| • |
Typical
LED lifetime of 100,000 hours |
| • |
Power
consumption less than 6 Watts as compared
to 100 to 1,000 Watts conventional grow
lights consume. On average, you use 33-times
less energy with our LED-PLANTBARs |
| • |
Lower
voltage (after passing through power supply |
| • |
Lower
burn and fire risk |
| • |
Light
weight |
| • |
Less
environmental hazard. LED-PlantBars contain no
mercury |
| • |
Power
supply accepts range of 100Volts AC to 240
Volts AC through American-style bi-blade
plugs. Simple plug adapter will convert any
country's plug style. |
|
| • |
Interior
landscape design |
| • |
Commercial
plant growing |
| • |
Grow
plants at home
in sunless areas |
| • |
Herb
gardens, lettuce gardens under kitchen
cabinets
|
| The
wavelengths of light emitted by our LED
plant light products are invisible to
most pests. By design, these LED-PlantBars
rarely attract bugs and pests to the
plants. |
|
|
| |
|
|
| Example
of Assembled PLANTRACK with 8 LED-PLANTBARs
and Power Supply
|
 |
To
purchase, order
Part Number
LED-PLANTBAR-008
and
Part Number
LED-PLANTRACK-001
|
Assembly Required
|
|
DIMENSIONS
IN INCHES [mm] |
|
|
|
Notes
LED based grow lights present a challenge when
replacing traditional grow lights. LEDs are low
energy devices (like fluorescent lights), this
means that they must be closer to the plants
than high energy sources (like HPS or MH
lights).
But there's a trade off between close and
coverage. Because LEDs output a "cone"
of light, closer means a decrease in coverage.
So a balance must be attained between desired
energy at the plant and coverage in square
feet.
Some plants require higher energy (plant closer
to bar) and thus for coverage you'll need to use
more bars in an offset stagger multiple bar
configuration to increase coverage. Some plants
require low energy to grow, so fewer bars at a
greater distance are possible. LED-PlantBars may
also be hung vertically within the foliage of a
dense plant for additional energy (a big selling
point as traditional lights cannot do this).
|
|
|
|
|
Gardening Tips for Using LEDtronics LED-PlantBar
Grow Lights |
| These
tips come from proven experience and should be
followed when possible to ensure success with
LED professional grow lights. This information
applies to both the use of individual light
bars, and light bars mounted in multiple bar
arrays.
|
| Temperatures
|
| Keep
environmental temperatures in the range of 70°F
– 80°F. (Lower temperatures = Slower plant
growth.) You should also monitor root zone
temperature as well.
|
| Watering
|
| DON’T
over water your plants. (Less heat from light source
= Less water loss
to evaporation). (Over watering = Slow root
development = Slow and stunted growth). Over
watering will also cause nutrient uptake issues
(you are feeding your plants, right?).
|
| Watering
rates using LED-PlantBars versus conventional
white light: Water
plants once and monitor the longer time it takes
for them to run low on water to determine your particular plant
specie's rate of water usage.
|
| Keeping
the root medium water saturated = No need for
the
plant to develop a larger root system = Stomata
closure, slow and stunted growth, and symptoms
of over watering.
|
| Using a more porous medium =
More oxygen to roots = Higher plant metabolism.
|
| Nutrients
and CO2
|
| Start
with a lower amount of nutrient (400-600ppm) or
half the recommended amount.
|
| When
commercial growing: Monitor your CO2
levels. LED lights emit a large amount of
absorbed light, which may require slight
augmentation of CO2
levels (300-500ppm).
|
| Lighting
|
| Remember,
it doesn’t look like much light to you, but it
is a lot of light to your plants.
|
| With
fruiting plants: Reduced photoperiod = Plant
stress = More flowering.
|
| If
your plants are grown indoors without
supplemental light, some plants—such as
tomatoes—may benefit from the addition of a
single 60Watt light placed anywhere in the room
with the plants. This provides a small amount of
invisible infrared light which some plants find
beneficial.
|
| Don’t
forget, your plants need to sleep just like we
do, except plants prefer that the room be
totally dark at night. Check on the internet or
with a local nursery to find out the preferred
light/dark period for the plants that you’ll
be growing.
|
| Safety
|
| The
light emitting diodes (LEDs) used in this
product are very high intensity. Never look
directly into the light at close distance, or
for long periods of time.
|
 |
|
An
LED-PlantBar array attached to a
supporting structure |
Special mounting tabs
allow multiple frames to be
bolted together and suspended
from S-hooks.
|
|
|
