| November
19, 2007
LEDtronics, Inc.:
DC-to-DC Dimmer for LED Lighting Products, Supports 5VDC to 40VDC, Up
to 2Amps
 LEDtronics® announces
the release of its new DC-to-DC Dimmer for LED Lighting Products, supporting
5VoltsDC to 40VoltsDC applications—up to 2Amps or 24Watts—LEDtronics
Part Number LED-DIMMER-001. The LED Dimmer makes it possible to dim all
5VoltsDC to 40VoltsDC LED products such as LED strip lights, LED bulbs
and LED floodlights. Since LEDs draw much less current than traditional
incandescent bulbs one had to buy a special high-end electronic dimmer
to control the desired light levels for their LED lighting application.
The DC-to-DC LED Dimmer is ideal to use for all your 12VoltsDC LED products,
mix-and-match LED light strips and LED bulbs, maximum load per DC-to-DC
Dimmer is 24Watts. The LED Dimmer will enhance your architectural low
power high-benefit lighting designs. Here’s an extra advantage
in using an LED dimmer: by lowering the current to the LED, you extend
the life of the LED.
LED dimming range is 0-100% of input. Input Voltage
can be any DC Voltage between 5VoltsDC and 40VoltsDC. Dimmer output
Voltage is continuously
adjustable between zero and full-on. LED Dimmers operate on minimal no-load
current (10-15mA). Power dissipation of the LED dimmer’s drive
circuitry is less than 0.7Watts. No extra load is added to the lighting
circuit, current draw is only 10-15mA. Not for use with inductive devices
such as motors, etc.
No special configuration is needed. LED Dimmer can drive up to 2000
Standard White discrete LEDs or 50 High-Flux LEDs. One unit can dim the
supplied power for an entire lighting channel or up to 2Amps, 24Watts
maximum of LED bulbs, floodlights, tube lights and light strips. The
LED Dimmer can be used with 12VoltsDC solar power systems or connect
directly to 120VoltsAC-to-12VoltsDC transformers. The size is 2.3inches
(58mm) long by 1.9inches (48mm) wide by 1.1inches (28mm) high (excluding
knob). Comes in an industry-standard hockey puck package design. Designed
for panel installation, rack installation, or stand-alone use.
Founded in 1983, LEDtronics® leads where others only follow when
it comes to designing, manufacturing and packaging state-of-the-art LEDs
to meet the world’s constantly changing lighting needs. Our inventive
product line encompasses an array of direct incandescent lamp replacement
Based LED bulbs, low-cost snap-in and relampable Panel Mount LEDs, high
intensity sunlight-visible Discrete LEDs, PCB LED circuit board status
indicators, surface mount diodes SMT LEDs, full-spectrum rainbow RGB
LEDs and infrared (IR) LEDs.
The price of one DC-to-DC LED Dimmer is $59.95. OEM and
MRO large quantity discounts are available. Availability is stock to
4 - 6 weeks. LEDtronics
LED Dimmer carries a two-year limited warranty. For additional information
on how to incorporate our LED Dimmer into your architectural lighting
designs, contact LEDtronics toll free at 1-800-579-4875, telephone 310-534-1505,
fax at 310-534-1424, e-mail at webmaster@LEDtronics.com or postal mail
at LEDtronics Inc., 23105 Kashiwa Court, Torrance, CA 90505. Visit our
website at: www.ledtronics.com.
Read the product datasheet online
at: www.ledtronics.com/ds/DIMMER/
Link to: New
Equipment Digest |
