Products on this page are
Made in USA
Made In USA
from imported parts
American Reinvestment and Recovery Act
Meets Buy American requirements within the ARRA

   
LED Pole-Mount Luminaire — Slim-Line Shoebox
70 Watt HPS or Metal Halide Replacement — Recommended mounting height of 8-16 feet
Up to 90% Energy Savings — Consumes Only 20 Watts — Only 3.0 inches Thick
Reduced Light Pollution —"Dark Skies" Initiative-Friendly
Energy Independence with Alternative Energy Resources: Solar, Wind & Fuel Cell Power
 Free Samples Are Not Available

Stainless Steel Enclosure Is Included
 Click down to Roadway Illumination Guideline 

White LED technology is patent protected in the US. LEDtronics White LED products are covered under these patents.

SLL003P-400_005 Series   LEDtronics Type-V, Circular-Beam Shoe Box Luminaire Replaces 70w, 100w Shoe Box Parking Light

70 Watt HPS Replacement — Recommended mounting height of 8-16 feet
  Electrical-Optical Characteristics (Ta = 25°C)  
CLICK TO ORDERPART NO.
(DESCRIPTION)		PRICEMIN BUYInput Voltage, V
(typ)		Power (W)Total
Lumens		Maximum
Candela		Illumination
Pattern		Weight, lbs [kg] Approx.CRIColor Temp.
(Kelvin)		LED Emitting
Color		Viewing
Angle‡‡
‡‡Full Beam Width at 50% Intensity


All specifications and pricing subject to change without notice.
Features:
  • Five Year Warranty
  • Major energy savings — Very low power consumption
  • Solid-state, high shock/vibration resistant
  • Life Expectancy: Based on 12 hrs/day = 11.4 years
  • Long Life: Lumen Maintenance of the White LEDs Is Greater than 70% at 50,000 Hours of Operation.
    (Rated Average Life Based on Engineering Testing and Probability Analysis)
  • Weighs only 12.5 lbs as compared to 39-42 lbs conventional lighting
  • 12/14VDC models for Solar/Wind-Powered applications available
  • Power factor corrected for maximum efficiency
  • Night Vision friendly
  • Reduces light pollution
  • "Instant On" with no delay in re-strike
  • Ambient Operating Temperature Range: ~-22°F to ~+122°F [~-30°C to ~+50°C]
Applications:
  • Street Lights Side
  • Walks/Pathways
  • Wall Uplight/Downlight
  • Wall Wash/Security Lighting
Materials / Construction:
  • Housing made from aluminium construction with all stainless steel hardware, with an electrocoat painted finish.
  • Lens made from clear, high-impact-strength, UV-stabilized polycarbonate to prevent fading and yellowing. Lens is sealed with a neoprene gasket to protect all internal components from any moisture or dust.
  • Fixture is intended for indoor or outdoor use and designed to protect against windblown dust, rain, splashing and direct hose “washdowns.”
    Roadway Illumination Guideline
    Classification I.E.S. Lighting Standard
    Street Area Average
    Illuminance
    (Footcandles)    		 Illuminance
    Uniformity
    Major Commercial 1.20 3.0 to 1
    Intermediate 0.90 3.0 to 1
    Residential 0.60 3.5 to 1
    Collector Commercial 0.80 3.0 to 1
    Intermediate 0.60 3.5 to 1
    Residential 0.40 4.0 to 1
    Local Commercial 0.60 6.0 to 1
    Intermediate 0.50 6.0 to 1
    Residential 0.30 6.0 to 1
    Parking Lot Open Space 0.5 - 2.0 4:1
      Notes:
      1. Source: Illumination Engineering Society of North America, "Lighting Handbook", 8th Edition, 1993.
      2. Footcandle is the amount of direct light thrown by one candle on a square foot surface, every part of which is one foot away from the candle.
      3. Illuminance uniformity ratio is the average illuminance of the roadway design area between two adjacent divided by the lowest value at any point in the area.