Home > Products > LEDG24QU-13W-XWW-001AW
Part #: LEDG24QU-13W-XWW-001AW
LED CFL Replacement Lamps, Rt-angled
13 watts, G24Q (4-pin), Ballast bypass only
Features
- Sale Item (Sale Terms & Conditions)
- Over 50,000 hr LED. Lumen Maintenance over 70%
- Direct Replacement with Ballast Bypass
- Energy Savings of up to 70% over CFLs
- No Toxic Mercury. RoHS. No Glass
- High CRI or Color Rendering Index Ra>80
- Rotating Base Allows changing Light Direction
- Solid State:High-Shock and High-Vibration Resistant
- Long Life. Instant Turn On
- 40+ Years LEDtronics Design & Manufacturing
- 'Made in USA' option available for qualified volume orders. Contact the factory.
Applications
- Ceiling Lights Beaming Down
- Wall Lanterns & Wall Sconces
- Ambient & Artwork Lighting
- Step Lighting
- Display Lighting
| Color |
| ||
|---|---|---|---|
| Color Temp |
| ||
| Voltage (V) | 100~277Vac (Tested@120Vac) | ||
| Power (Watts) | 103.9 W | ||
| Current (Amps) | 0.823 A | ||
| Operating Temp | -20°C ~+50°C, IP65 | ||
| Power Factor | 0.9119 | ||
| Efficacy | 139.77 | ||
| Intensity (Candela) | 3501 cd | ||
| Lumens | 14522 lm | ||
| CRI | 72.1 | ||
| Viewing Angle | 130° | ||
| Illum Pttrn | Type-V (Circular) | ||
| Electrical-Optical Characteristics (Ta = 25°C) | |||
Caution
- Intended only for installations where the lamp is oriented horizontally, with light beaming downward
- Ballast bypass required
- Not intended for totally enclosed fixture
- Surge protection recommended.
- G24 fluorescent bulb socket fixtures have a ballast and/or starter that needs to be bypassed. If the socket has had the ballast bypassed for LED bulbs, then the socket should be labeled for LED bulb use only. (See instructions pdf, blue button.)
- LED Bulbs must not exceed the listed Ambient Operating Temperature Range.
- Our LED bulbs are designed for optimum performance in properly vented fixtures. To prevent overheating of the lamp which may cause premature failure of the LEDs, do not install in a totally enclosed fixture. Recessed fixtures with some type of venting are more desirable for use with these lamps.
- These models are for use with standard ON/OFF switches only, not with a dimmer. Use with any type of dimmer, relay or other current/voltage control circuit device will VOID WARRANTY.
- Risk of electrical shock. Do not use where directly exposed to water.