Home > LED Sfety, Solar & Consumer Products > Solar Power Products, Panels & Controllers > Solar Power Products, Panels & Controllers

Solar Panel Charging Controller with Timer,
12V/24V DC Auto Detect, 5 A and 15 A


Solid State — Charges While LEDs in Use — Hi/Lo Battery Protection


 
  • One Year Warranty
  • INSTALL INSTRUCTIONS
  • SLR-CONTROLLER-005
  • INSTALL INSTRUCTIONS
  • SLR-CONTROLLER-006
  • ISO 9001
  • PART NUMBER: SLR-CONTROLLER-00x
  • Nominal Voltage: 12VDC / 24VDC
  • Max. Charge Current:
    SLR-CONTROLLER-005: 7A (Solar Panels Up to 50W)
    SLR-CONTROLLER-006: 15A (Solar Panels Up to 100W)
  • Low-Voltage Disconnect: 10.8V / 21.6V
  • Reset: 12 / 24V – Adjustable
  • Overcharge protection: 14.5 / 29V
  • Restart of charging: 13.7V
  • Self-consumption: 2mA / 4mA @12V
  • Lighting Switch: Lights automatically at first darkness
  • Lighting Modes: Constant / Flashing (60 times/min) / Custom Changing
  • Operating temperature: -4° to +167° F [-20°C to +80°C]
  • Ingress Protection: IP22 Rating
  • Sun Level Adjustments.: 0-7
  • Timer: 0 to 15 hours
  • Dimensions:
    4.32in (W) × 2.32in (D) × 1.3in (H)
    [110mm (W) × 59mm (D) × 33mm (H)]
  • Weight: 3.9oz [110 g]

Note: To adjust the timer, please see the following chart for the DIP-switch settings.

Timer Settings Chart
Timer hours No.5 No.6 No.7 No.8 Remark
0 OFF OFF OFF OFF TIMER OFF
1 ON OFF OFF OFF
2 OFF ON OFF OFF
3 ON ON OFF OFF
4 OFF OFF OFF ON
5 ON OFF ON OFF
6 OFF ON ON OFF
7 ON ON ON OFF
8 OFF OFF OFF ON
9 ON OFF OFF ON
10 OFF ON OFF ON Default setting
11 ON ON OFF ON
12 OFF OFF ON ON
13 ON OFF ON ON
14 OFF ON ON ON
15 ON  ON ON ON

Please Keep Number 1 switch at OFF location.
New setting will take effect after restart (disconnection and reconnection of the battery).


Power to lights may be programmed to turn ON at different ambient light conditions. Programming is accomplished by setting the DIP switch, positions 2, 3, and 4. Refer to the chart below. If it is desired to turn ON the lamp/load only during dark conditions, set the DIP switch to CDS Light Sensor Degree 1, 2, or 3. If it is desired to turn ON the lamp/load under more illuminated conditions, set the DIP switch to CDS Light Sensor Degree 4, 5, 6, or 7. 

To disable the ambient light sensor — thus providing power to the lamp/loads all the time — set the DIP switch for the CDS-Light-Sensor Degree to “0”. 

To enable the CDS Light Sensor Degree selections, it is necessary to remove the battery connections for 10 seconds and reconnect. The solar panel is utilized as the CDS Light Sensor.

Light Sensor Chart
CDS ( Light sensor degree ) No.2 No.3 No.4 Light sensor degree
0 OFF OFF OFF NO LIGHT SENSOR
1 ON OFF OFF
2 OFF ON OFF
3 ON ON OFF Default settings CDS=3
4 OFF OFF ON
5 ON OFF ON
6 OFF ON ON
7 ON  ON ON

Charging Control for Solar Panel Modules

  SLR-CONT  
5W, 10W, 25W, 50W (and 100W "-006" model)
Brochure for SLR-CONTROLLER
CLICK TO ORDERPART NO.
(DESCRIPTION)
PRICEMIN BUY
SLR-CONTROLLER-005
(12/24VDC,5Amp Solar Charging C15RE)
$23.50ea1
CALL 800-579-4875Volume Discount Thru Distributor
Electrical / Optical Characteristics (Ta = 25°C)
CLICK TO ORDERPART NO.
(DESCRIPTION)
PRICEMIN BUY
SLR-CONTROLLER-006
(12/24VDC,15Amp Solar Charging Con15RE)
$31.25ea1
CALL 800-579-4875Volume Discount Thru Distributor
Electrical / Optical Characteristics (Ta = 25°C)

All specifications and pricing subject to change without notice.


Features

  • Warranty: 1 Year
  • Reverse Voltage/Charge Protection: Does Not Allow the Battery to Drain Back into the Solar Array When the Array Is Not Charging the Battery
  • Overcharge Protection: Senses When the Battery Is Fully Charged, Keeping It at a Safe Voltage
  • Discharge Prevention: Turns Off the Load When Battery Voltage Drops Below a Safe Level – Prevents Discharging the Battery to Zero Volts, Possibly Causing a Reverse-Charge Condition Or Damaging the Battery
  • Ingress Protection: IP22 Rating
  • Adjustable Timer Control
  • 12V/24V System Auto-Detect
  • Temperature Compensation
  • PWM Charging
  • Low Overhead Power Consumption
  • Reversed Battery Connection Protection
  • All Solid-State Circuitry: No Relays to Fail
  • Ambient Light Sensor (Solar Panel as a Light Sensor) with Adjustable Set Point – Power to Lights May Be Programmed to Turn ON at Different Ambient Light Conditions
  • Designed for Gelled Lead-Acid Batteries – Not Recommended for NiCad Batteries

Applications

  • Solar Power Charge Controller for 5W, 10W and 25W Solar panels