Skip Navigation LinksHome > Media > LEDtronics Products in the News > 2007 Products in the News > LEDtronics DC to DC Dimmer for LED Lighting Products, Supports 5VDC to 40VDC, Up to 2Amps


LEDtronics Products in the News
LEDtronics DC to DC Dimmer for LED Lighting Products, Supports 5VDC to 40VDC, Up to 2Amps
14-NOV-07

LEDtronics® announces the release of its new DC to DC Dimmer for LED Lighting Products, Supports 5Volt DC to 40Volt DC, up to 2Amps or 24Watts, part number LED-DIMMER-001. The LED Dimmer makes it possible to dim all 5Volt DC to 40Volt DC LED products such as LED strip lights, LED bulbs and LED floodlights. Since LEDs draw much less current then traditional incandescent bulbs one had to buy a special high-end electronic dimmer to control the desired light levels for their LED lighting application. The DC to DC LED Dimmer is ideal to use on all your 12Volt DC LED products, mix and match LED light strips and LED bulbs, max load per DC to DC Dimmer is 24Watts. The LED Dimmer will enhance your architectural low power high-benefit lighting designs. An extra advantage in using a LED dimmer: by lowering the current to the LED you extend the life of the LED.

LED Dimming Range is 0-100% of Input. Input Voltage can be any DC Voltage between 5Volt DC and 40Volt DC. Dimmer output Voltage is continuously adjustable between zero and full-on. LED Dimmer operates on minimal no-load current (10-15mA). Power dissipation of the LED dimmers drive circuitry is less than 0.7Watts. No extra load added to the lighting circuit, current draw is only 10-15mA. Not for use with inductive devices such as motors etc…

No special configuration needed. LED Dimmer can drive up to 2000 Standard White discrete LED’s or 50 High-Flux LEDS. One unit can dim the supplied power for an entire lighting channel or up to 2Amps, 24Watts Max of LED bulbs, floodlight, tube lights and light strips. LED Dimmer can be used with 12Volt DC solar power systems or connect directly to 120Volts AC to 12Volt DC transformers. Size is 2.3inch (58mm) long by 1.9inch (48mm) wide by 1.1inch (28mm) high (excluding knob). Comes in an industry-standard hockey puck package design. Design for panel or rack installation, or stand-alone use.

Prices for DC to DC LED Dimmer in quantity one is $59.95. OEM and MRO Large quantity discounts are available. Availability is stock to 4 - 6 weeks. LED Dimmer carries a Two-year limited warranty. For additional information on how to incorporate our LED Dimmer into your architectural lighting designs,contact LEDtronics toll free at 1-800-579-4875, telephone 310-534-1505, fax at 310-534-1424, click here to email us or mail at LEDtronics Inc., 23105 Kashiwa Court, Torrance, CA 90505. Visit our website at www.LEDtronics.com.

About LEDtronics Inc.:
Founded in 1983, LEDtronics® leads where others only follow when it comes to designing, manufacturing and packaging state-of-the-art LEDs to meet the world’s constantly changing lighting needs. Our inventive product line encompasses an array of direct incandescent lamp replacement Based LED bulbs, low-cost snap-in and relampable Panel Mount LEDs, high intensity sunlight-visible Discrete LEDs, PCB LEDs circuit board status indicators, surface mount diodes SMT LEDs, full-spectrum rainbow RGB LEDs and Infra-Red (IR) LEDs.

Read the product datasheet online at: DIMMER


For Technical Information Contact:
Jordon Papanier at 310-534-1505
E-Mail: click here
Link to: LED Professional
 
 
LinkedIn Twitter Facebook YouTube Instagram Flickr