• Warranty: 5 Years
• Low Power Consumption: Only 27 Watts
• Wide Voltage Range: 100-277VAC
• Ventilated: Lamp Assembly Feature Aids in Maintaining Cool-Running Lamp
• Optimized Design: LEDs Are Mounted to Provide Maximum Luminance at Desired Angles to the Targeted Area
• Optimized Circuitry: Power Factor Corrected for Maximum Efficiency
• Long Life: Lumen maintenance of the white LEDs is greater than 70% at 35,000 hours of operation.
  (Rated average life based on engineering testing and probability analysis)
• Instant-On: No Delay in Re-Strike
• Lab Tested in Accordance with IES Standards
• Solid-State: High-Shock & High-Vibration Resistant
• Wide Ambient Oper. Temp. Range: ~-22°F to ~+122°F [~-30°C to ~+50°C]
• Safety Assurance: ETL Listed

• Washington Globe Street & Walkway Lamps
• Enclosures

• Major Energy Savings: Up to 85% – LED Bulb Consumes 27 Watts vs 175W by MH (150W Lamp & 16-25W Transformer)– A Reduction of up to 125W
• Longer Lifespan than MH or Other HID Lamps
• Maintenance-Free for over 5 Years of Operation
• No Wasted Light: Reduces Light Pollution; “Dark Skies” Initiative-Compatible – Eliminates Light Intrusion into Offices, Residences...
• Enhances Vision: Better Optical Acuity – Little or No Glare as Compared with High Glare from HID Lamps
• No Ultraviolet Emission: Does Not Attract Insects

• Base Up Available, with LEDs Below Base for Pendant Lighting Applications

Note: Any ballast that functioned with the replaced lamp needs to be bypassed (Operating Voltage 100-277 VAC)

When Installing Lamps In Potentially Corrosive Outdoor Environments

LEDtronics suggests that a silicone moisture-barrier sealant be used to protect the metal-threaded base of the LED bulb.

Sealant is highly recommended for all outdoor-environment LED bulb installations to prevent water and/or moisture incursion that can lead to premature degradation of the bulb base and eventual bulb failure. This is especially recommended for LED bulb installations near saltwater bodies.

Dow Corning Molykote® 111 Valve Lubricant and Sealant is a high-temperature, moisture-resistant, silicone grease. If liberally applied to the clean surface of the lamp socket and the base of the lamp itself, it will provide moisture and corrosion resistance.


Dow Corning's® material spec sheet for Molykote® 111 Valve Lube & Sealant

White LED technology is patent protected in the US. LEDtronics White LED products are covered under these patents.

LEDtronics Patents
Utility Patent # US 7,862,204 B
Utility patent # 8,128,258 B2
Utility patent # US 8,157,416 B2
Design Patent # US D631,567 S