Products on this page are
Made in USA
Made In USA
from imported parts
American Reinvestment and Recovery Act
Meets Buy American requirements within the ARRA

Narrow Beam LED Streetlight Shoebox Fixture, Slim Line, 85/264VAC
15° Viewing Angle — Better Visibility — Easy Connectivity — Uses Only 20Watts of Power
Suitable for Replacing 70Watt to 100Watt HPS & MH Streetlights
Energy Independence with Alternative Energy Resources like Solar, Wind & Fuel Cell Power
Major Reduction in Energy Use, Reduces Light Pollution, "Dark Skies" Initiative Compatible

Type V Circular Beam Pattern   

Type III Oval Beam Pattern 

UL Listing Pending,
Design Patent US D542,958 S

SLL003P-400_001 Series   LEDtronics Shoebox Post-Mounted Luminaire Replaces 70Watt to 100Watt HPS & MH Streetlights

 Free Samples Are Not Available

Stainless Steel Enclosure Is Included

Have Questions About Our Streetlights?
Please fill out our online questionnaire
Materials / Construction:
Housing —
Made from stainless steel construction with all stainless steel hardware, with an electrocoat painted finish.
Lens — Made from clear high-impact-strength polycarbonate, UV stabilized to prevent fading and yellowing. Lens is sealed with a neoprene gasket to protect all internal components from any moisture.
Fixture – is intended for indoor or outdoor use and designed to protect against windblown dust, rain, splashing and direct hose “washdowns”.

Cool White Power-Factor-Corrected 85-264VAC LED Slim Line Shoebox
  Electrical-Optical Characteristics (Ta = 25°C)  
PRICEMIN BUYInput Voltage, V
Power (W)Total
CRIColor Temp.
LED Emitting

‡‡Full Beam Width at 50% Intensity

Other Colors (Red, Orange, Yellow, Green, Blue) available for large quantity orders (100 or more)
Other Voltages like 12/14V, 24/28V, 240VAC available for large quantity orders (100 or more)
Other LED Beam Angles for different effects available for large quantity orders (100 or more)

All specifications and pricing subject to change without notice.
  • Five Year Warranty
  • Major Energy Savings. Night Vision Friendly
  • Solid-State, High Shock / Vibration Resistant
  • Conforms to IESNA Standards
  • Long Life LEDs last for 100,000 Hours; White LEDs, 50,000 plus Hours
  • Mounts on Industry Standard Lamp Posts
  • Weighs only 18.65lbs. as Compared to (39-42lbs)
  • Power Factor 0.7. Power-Factor-Corrected Available
  • Very Low Power Consumption, Super Intensity
  • Reduces Light Pollution
  • "Instant On" with no delay in re-strike
  • Ambient Operating Temperature Range: ~-22°F to ~+122°F [~-30°C to ~+50°C]
Options:  For qualified applications and large quantity orders
  • Other Voltages Available
  • Other LED Colors Available
  • Narrow Beam or Wider Angle Available
  • Other Light Fixture Shapes Available
    Roadway Illumination Guideline
    Classification I.E.S. Lighting Standard
    Street Area Average
    Major Commercial 1.20 3.0 to 1
    Intermediate 0.90 3.0 to 1
    Residential 0.60 3.5 to 1
    Collector Commercial 0.80 3.0 to 1
    Intermediate 0.60 3.5 to 1
    Residential 0.40 4.0 to 1
    Local Commercial 0.60 6.0 to 1
    Intermediate 0.50 6.0 to 1
    Residential 0.30 6.0 to 1
    Parking Lot Open Space 0.5 - 2.0 4:1
      1. Source: Illumination Engineering Society of North America, "Lighting Handbook", 8th Edition, 1993.
      2. Footcandle is the amount of direct light thrown by one candle on a square foot surface, every part of which is one foot away from the candle.
      3. Illuminance uniformity ratio is the average illuminance of the roadway design area between two adjacent divided by the lowest value at any point in the area.